Products

Cable to connect the Spirit Battery Plus to the Pod Drive 1.0 Evo motor.

Select a tiller or wireless remote control with integrated display monitoring real-time motor and battery status for Spirit 1.0R Evo, Navy Evo mode...

The 60W DCDC converter is used to convert E-Series battery from 48V to 12V for powering other 12V devices. 60 watts output power. Compatible with:...

Busbar for 48V battery to connect devices such as charger, MPPT solar charger or DC/DC converter. Compatible with: Spirit 1.0 Plus / Spirit 1.0 Ev...

Battery charger for E-Series batteries. Max output current 20A (110V). Chargers can be connected in parallel for a maximum of 8 units to speed up c...

The ePropulsion E-Series Lithium Battery 48V offers superior performance and durability. Its LiFePO4 chemistry is 30% lighter than AGM lead-acid ba...

A 1.5m communication cable used for the parallel connection between E-Series batteries. Compatible with: E40 / E80 / E175

Cables to connect E40 & E80 & E175 series batteries in parallel. Sold as single cables.

2 meter communication cable that extends the parallel connection distance between E40 & E80 & E175 batteries. Compatible with: E40 / E80 / ...

Terminator for parallel connection of E40 & E80 & E175 batteries. It connects to the CAN-IN port on the master battery. Compatible with: E4...

Display panel for E40 & E80 & E175 batteries.

This switch allows you to switch on/off parallelled E40 & E80 & E175 batteries. It connects to the CAN-IN port on an E40 & E80 & E1...

A communication cable (0.5m/1.5m/5m) used for parallel connection between E60/E163 Series batteries or G-Series batteries. Compatible with: E60 / E...

Positive and negative cables to connect the motor to E60 or E163 batteries.

Connectors for E60 or E163 batteries and motor connection.

E-Series battery parallel connection cables. Positive and negative cable included. Compatible with E60 and E163 batteries. 

A Can Bus T-style connector with one male plug and two female plugs, enabling connection of both the controller and E60/E163 batteries to an ePropu...

Terminators are required on either end of the CAN bus when connecting E60 & E163 & G-Series batteries in parallel. It connects to the CAN-I...

This switch allows you to turn on or off parallelled E60, E163 or G-Series batteries. It connects to the CAN-IN port on an E-Series or G battery. C...

Shut down the motor upon the removal of this magnetic kill switch. Select a version that works with Sprit Plus / Evo Tiller, for the side mount co...

Replaceable anode for  Pod 1.0 Evo and Pod 3.0 Evo folding propeller. Compatible with: Pod Drive 1.0 Evo (P1-LU02-E0) and Pod Drive 3.0 Evo (P3-LU...

For G-Series battery parallel connections (up to 8 in a cluster) and for connection from battery to motor. Compatible with: G102-100 batteries.

Premium LFP cells and a sophisticated BMS equip the G-Series Lithium Battery, providing unbeatable performance and durability ideal for electric bo...

Replacement 10.2” × 6.7” 2-blade composite propeller for Navy 3.0 Evo outboard motors. Item Number: N3-LU05-00.

The ePropulsion anti-cavitation plate is designed to reduce the formation of vaporized air bubbles caused by water flow disturbances, crafted from ...

Replacement 12.6″ × 8.7″ 3-blade aluminum propeller for Navy 6.0 Evo outboard motor. 

Replacement propeller for Navy 6.0 in both low pitch and high pitch variants. 13.4″ × 8.5″ 3-blade composite propeller.

Sacrificial anodes to protect Navy Evo and Pod Evo motors. Replace anodes periodically to prevent corrosion of outboard and pod drive motors.

The Navy Series from ePropulsion is a reliable and low-maintenance electric outboard motor, delivering efficient, clean power for aluminum fishing ...

3-blade aluminum propeller upgrade for Pod drive EVO 6.0. Dimensions: 12.6″ × 8.7″. Compatible with: Pod Drive 6.0 Evo

Upgrade to a folding propeller for your ePropulsion pod drives. This folding propeller expands when the pod drive is powered in forward or reverse ...

ePropulsion IP67 wireless safety wristband works with Evo Tiller / Evo Remote Control. It automatically shuts down the motor in case of an accident...

Display panel, for I-Series inboard motor Display battery stats and range information. Item Number: XS-DP00-00. Compatible with: I-10 / I-20 / I-4...

Wired remote throttle control for I-Series inboard motors. Item Number: XS-RC00-00. Compatible with: I-10 / I-20 / I-40 / H-Series

Replaceable anodes for Spirit 1.0 Spirit 1.0 Plus and Spirit EVO outboard motors.

Set of bags designed easy transportation and storage of a Spirit outboard motor and a Spirit battery pack. Item Number: S1-BG00-01. Compatible with...

ePropulsion SPIRIT 1.0 Evo Outboard is a powerful 3HP portable electric outboard designed for dinghies, fishing boats, and sailboats. The 1276Wh la...

Extension power cable connects the Spirit battery and outboard motor and allows for placement of the battery up to 2 meters from the motor. Item nu...

Replacement 11” × 5.8” 2-blade composite propeller for Spirit 1.0 Plus and Evo outboard motors. Item number: S1-M001-00. Compatible with: Spirit 1....

Spirit 1.0 Plus is a highly portable 3 horsepower electric outboard motor designed for dinghies, fishing boats, sailboats, and tenders. Its long ra...

Link arm for dual motor steering. Compatible with: Spirit 1.0 Plus / Spirit 1.0 Evo / Spirit 1.0 Evo R / Navy 3.0 Evo / Navy 6.0 Evo.

The ePropulsion SPIRIT Battery Plus has a high energy denisty and a compact size. The battery hase positive buyancy and will float if accidentaly...

Battery power output set for Spirit Battery plus allows for powering other devices like an inflatable pump. Item Number: S1-BA01-00. Compatible wi...

This cable allows you to connect the Spirit 1.0 Plus/Evo motor with a 48V E-Series battery to extend range. Compatible with: Spirit 1.0 Plus / Spir...

Motor Cowling for Spirit 1.0 Plus and Spirit 1.0 Evo outboard motors when using an external battery,

Connect a motor and a control or a motor and an E-Series battery for more accurate data transmission. Cables compatible with: Spirit 1.0 Plus / Sp...

Communication cable with one male connector and two female connectors, allowing you to use a communication cable to connect both the control and t...

Fischer Panda genuine replacement air filter medium. 75mm x 75mm. Fits Fischer Panda models P4 Eco, P8, P12 and models P5i through 10i.