






Victron Energy Blue Smart IP67 Charger - Waterproof (120V, Bluetooth)
Free shipping over $49
60-day hassle-free returns
The Victron Blue Smart IP67 is a fully sealed, waterproof Bluetooth battery charger for marine and powersport use where a charger has to survive water, oil, dirt, and vibration. The case is cast aluminium and the electronics are moulded in resin - waterproof, shockproof, and ignition-protected. It charges lead-acid and lithium banks with a 5-stage adaptive algorithm and is monitored and configured over Bluetooth in the free VictronConnect app. Available in 12V (7/13/17/25 A) and 24V (5/8/12 A).
Who it's built for
- Boats and personal watercraft - mount it where a standard charger wouldn't survive: engine bays, wet lockers, exposed compartments.
- Powersports and seasonal vehicles - a rugged, leave-connected charger and maintainer for batteries that sit between uses.
- Lithium and lead-acid - selectable profiles for LiFePO4, AGM, gel, and flooded banks.
Why the Blue Smart IP67
Completely sealed - IP67
Waterproof, shockproof, and ignition-protected. Water, oil, or dirt won't damage it, so it can live in harsh, wet, or high-vibration locations a typical charger can't.
Bluetooth built in
Monitor voltage, current, and status, change settings, and update the charger from your phone in the VictronConnect app - no display needed.
5-stage adaptive charging
Bulk, absorption, recondition, float, and storage - the microprocessor tunes the charge to how the battery is used. Storage mode drops the float voltage after 24 hours idle to reduce gassing and corrosion, with a weekly refresh, so it's safe to leave connected long-term.
Charges lithium and recovers flat batteries
Dedicated Li-ion profile, plus a fully-discharged recovery function that starts charging even a battery at zero volts (and reconnects to a lithium battery whose BMS has disconnected).
High efficiency, runs hot environments
Up to 96% efficient with under 0.5 W idle draw, and rated to operate from -30 C to +60 C (full output to 40 C) - happy in a hot machine room or engine space.
Available variants
All variants are sold on this page - choose your voltage and current from the variant selector above. Each charges a single battery and comes with fixed battery leads and a NEMA 5-15 AC plug.
| Model | Battery voltage | Charge current | Efficiency | Weight |
|---|---|---|---|---|
| Blue Smart IP67 12/7 | 12 V | 7 A | 93% | 4.0 lb |
| Blue Smart IP67 12/13 | 12 V | 13 A | 93% | 4.0 lb |
| Blue Smart IP67 12/17 | 12 V | 17 A | 95% | 5.3 lb |
| Blue Smart IP67 12/25 | 12 V | 25 A | 95% | 5.3 lb |
| Blue Smart IP67 24/5 | 24 V | 5 A | 94% | 4.0 lb |
| Blue Smart IP67 24/8 | 24 V | 8 A | 96% | 5.3 lb |
| Blue Smart IP67 24/12 | 24 V | 12 A | 96% | 5.3 lb |
Not sure which charger fits your battery? Get a custom quote from our Seattle team or book a system consultation.
Charging
- 5-stage adaptive algorithm, configurable in VictronConnect.
- 12V charge voltages: Normal absorption 14.4 V / float 13.8 V / storage 13.2 V; High 14.7 V; Li-ion 14.2 V abs / 13.5 V float.
- 24V charge voltages: Normal absorption 28.8 V / float 27.6 V / storage 26.4 V; High 29.4 V; Li-ion 28.4 V abs / 27.0 V float.
- LOW mode reduces output current (and noise); can also be used as a DC power supply.
Full technical specifications
- Input: 100-135 VAC, 45-65 Hz; 1.5 m (5 ft) cable with US NEMA 5-15 plug
- Battery connection: fixed black and red leads, 1.5 m (5 ft)
- Efficiency: 93-96% by model; no-load draw 0.5 W
- Battery types: lithium (LiFePO4), AGM, gel, flooded
- Protection: reverse polarity (fuse), output short circuit, over-temperature
- Operating temperature: -30 C to +60 C (full output to 40 C; derate 3%/°C above 40 C)
- Humidity: up to 100%
- Enclosure: cast aluminium, RAL 5012 blue, resin-potted; IP67 (waterproof, shockproof, ignition-protected)
- Status: two LEDs (charge stage + power); Bluetooth for full status and config
- Dimensions: 85 x 211 x 60 mm (7/13/24-5 A models); 99 x 219 x 65 mm (17/25/24-8/24-12 A models)
- Standards: UL 1236, CSA C22.2, EN 60335-1/-2-29
Recommended accessories
- SmartShunt or BMV-712 Smart - battery state-of-charge monitoring
- Blue Smart IP22 or IP65 - if you don't need a fully waterproof, sealed charger
Frequently asked questions
How waterproof is it really?
IP67 - it can withstand temporary immersion and is sealed against water, oil, and dust. The case is cast aluminium with the electronics potted in resin, and it's also shockproof and ignition-protected.
Does it charge lithium batteries?
Yes - select the Li-ion profile. It also has a fully-discharged recovery function that can wake a battery at zero volts and reconnect to a lithium battery whose BMS has tripped.
Can I leave it connected long-term?
Yes. Storage mode lowers the voltage after 24 hours idle to reduce aging, with a weekly refresh - safe for long-term float and seasonal storage.
Does it have a screen?
No - status is shown on two LEDs, and full detail (voltage, current, settings, history) is in the VictronConnect app over Bluetooth.
What warranty does it come with?
A 5-year limited warranty from Victron Energy. Blue Marine handles the warranty claim process for you. Email support@bluemarine.com.
Why buy your Victron charger from Blue Marine
- True Blue Victron Energy Distributor - genuine Victron chargers, in stock.
- Certified technicians on the phone - (800) 628-6306 to size your charger.
- Free shipping over $49 from our Seattle warehouse.
- 60-day hassle-free returns and local pickup in Seattle, WA.
- Custom quotes and full system design - charger, battery, monitoring, and cabling as one package.
Manuals & Datasheets
Datasheets
Manuals
Guides & resources
- Blue Smart IP67 Charger — Enclosure Dimensions (3D)
- Blue Smart IP65 & IP67 Chargers — UL 1236 & CSA C22.2 Certificate
Need a document you don't see here? Schedule a consultation or email support@bluemarine.com and we'll send it over.
Choose options







About Blue Marine
Nationwide Shipping from Our Warehouse in Seattle
Knowledgeable ABYC Certified advisors, friendly advice and fast shipping.