Victron Energy MultiPlus-II Inverter Charger 12/3000/120-50 120V OPEN BOX SN: HQ2216DAP2G

Mounting the MultiPlus-II

• Choose a solid, vertical surface to mount the MultiPlus-II. Ensure the installation space is dry, well-ventilated, and free from dust.
• Secure the unit using the provided mounting holes at the top and bottom of the MultiPlus-II, leaving enough clearance around the unit for airflow.

Connecting the Battery (DC Side)

• Use appropriate DC cables to connect the positive and negative terminals from the battery to the MultiPlus-II.
• Install a fuse in line with the positive cable near the battery to protect against overcurrent.
• If using lithium batteries, connect a Battery Management System (BMS) to manage the charging and discharging processes safely.

Connecting AC Input and Output

• Wire the AC input (shore power or generator) to the designated AC input terminals on the MultiPlus-II.
• Connect the AC output to your distribution board or directly to loads. Make sure to use the correct wire size for the AC side, based on your system’s specifications.
• Follow local wiring regulations, and use strain reliefs to secure the cables.

Grounding the System

• Connect the grounding terminal to the system’s earth point for safety.
• Ensure both the DC and AC sides are properly grounded according to local regulations.

CONFIGURING THE SYSTEM

VEConfigure (Local Setup)

• Download and install VEConfigure software on your computer from Victron Energy’s website.
• Connect the MultiPlus-II to your computer using an MK3-USB.
• NOTE: Computer needs to be a PC.
• Open VEConfigure: Launch the software and detect the connected MultiPlus-II device.
• Set battery charging parameters: Select the correct battery type (e.g., Lithium, AGM, Gel), and configure charge voltages and current limits to suit your battery bank.
• Input current limit: Set the input current limit for shore power or generator, ensuring it matches your AC source to avoid overloads.
• Inverter mode settings: Adjust inverter settings like AC input priority, PowerAssist, or other advanced features as needed.

VRM Remote VEConfigure (Remote Setup)

• Access the VRM Portal: Log into the Victron Remote Monitoring (VRM) portal using your account credentials.
• Connect to the MultiPlus-II via a GX Device: Ensure the system is connected to the internet via a Cerbo GX, Color Control GX, or similar GX device.
• Select Remote VEConfigure: Navigate to the device’s settings in the VRM portal and choose the Remote VEConfigure option.
• Configure charging settings: Similar to local setup, adjust battery type, charge voltages, and limits remotely.
• Adjust inverter and input settings: Set inverter parameters, including input current limits, PowerAssist, or grid-tie settings, all through the portal.

Victron Energy offers a 5-year limited warranty on power products*. This is upgradable to 10 years by an additional 10% of the initial investment. Contact us at support@bluemarine.com for more information on warranty or for the process to submit a claim to Victron Energy.

* Except on Victron Energy batteries: on lead-acid and AGM batteries there is a 2-year limited warranty and 3-year limited warranty on Lithium batteries.